Engineering
Engineering, 17.02.2020 18:17, Jorjalilli8786

Consider the internal structure of the pseudo-CPU augmented with a single-port register file (i. e., only one register value can be read at a time) containing 32 8-bit registers (R31-R0) and a carry bit (C-bit), which is set/reset after each arithmetic operation. Suppose the pseudo-CPU can be used to implement the AVR instruction ADIW ZH:ZL,32 (Add immediate to word). ADIW is a 16-bit instruction, where the upper byte represents the opcode and the lower byte represents an immediate value, i. e., "32" (do not worry about the fact that the actual format is slightly different). Give the sequence of microoperations required to Fetch and Execute the ADIW instruction.

Your solutions should result in exactly 5 cycles for the fetch cycle and 6 cycles for the execute cycle. Assume the memory is organized into addressable bytes (i. e., each memory word is a byte), MDR, IR, and AC registers are 8-bit wide, and PC and MAR registers are 16-bit wide. Also, assume Internal Data Bus is 16-bit wide and thus can handle 8-bit or 16-bit (as well as portion of 8-bit or 16-bit) transfers in one microoperation and only PC and AC have the capability to increment itself.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, winterblanco
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
image
Engineering, 04.07.2019 18:20, sanchez626
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
image
Engineering, 04.07.2019 19:20, carterdaw
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
image
Engineering, 04.07.2019 19:20, holaadios222lol
Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.
Answers: 1
Do you know the correct answer?
Consider the internal structure of the pseudo-CPU augmented with a single-port register file (i. e.,...

Questions in other subjects:

Konu
Mathematics, 05.09.2021 01:00
Konu
English, 05.09.2021 01:00
Konu
Mathematics, 05.09.2021 01:10