Water flows at a rate of 7 m^3/s in a circular sewer 1.6 meters in diameter. The slope of the sewer is 0.01.
(a) Calculate the depth of flow and velocity in the sewer, assuming normal flow.
(b) Determine the diameter of pipe required for the discharge to be carried at 3/4 full.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line