Engineering, 15.02.2020 05:24, asyamelissa01

A rigid 14-L vessel initially contains a mixture of liquid water and vapor at 100°C with 12.3 percent quality. The mixture is then heated until its temperature is 180°C. The final state is superheated water and the internal energy at this state should be obtained by interpolation. Calculate the heat transfer required for this process. Use data from the steam tables.

Answers: 1

Show answers

Answers

answered: sonyalehardez

98.13kJ

Explanation:

Given that;

The rigid 10-L vessel initially contains a mixture of liquid water & vapor at

$T_1 =100^0C\\T_2 = 180^0C$

We are to calculate the heat transfer required during the process by obtaining our data from the steam tables.

In order to do that, let start with our Energy Balance

So, Energy Balance for closed rigid tank system is given as:

$\delta E_{system} = E_{in} - E_{out}$

Since the K.E and P.E are insignificant;

∴ K.E = P.E = 0

$Q_{in}= \delta U + W\\Q_{in} = m(u_2-u_1)+ W$

Where;

m = mass flow rate of the mixture

(u_2-u_1) = corresponding change in the internal energy at state point 2 and 1

However, since we are informed that the vessel is rigid, then there is no work done in the system, then W turn out to be equal to zero .i,e

W = 0

we have our above equation re-written as:

$Q_{in}= m (u_2-u_1)+0\\$

$Q_{in}= m(u_2-u_1)$

We were told to obtain our data from the steam table, so were going to do just that

∴ At inlet temperature T_1 = 100^0C , the given quality of mixture of liquid water and vapor (x_1) = 123% = 0.123

Using the equation:

$v_1 = v_f + x_1v_{fg}\\v_1 = v_f + x_1(v_g-v_f)$

where;

v_1 = specific volume at state 1

v_f = specific volume of the liquid

v_g = specific volume of the liquid vapor mixture

The above data from the steam table is given as;

v_f = 0.001043 m³/kg

v_g = 1.6720 m³/kg

so; we have

v_1 = 0.001043 + 0.123(1.6720-0.001043)

v_1 = 0.001043+0.123(1.670957)

v_1 =0.001043+0.205527711

v_1= 0.206570711m^3/kg

v_1=0.2065m^3/kg

At T_1 = 100°C and x_1=0.123 ;

the following steam data from the tables were still obtained for the internal energy; which is given as:

Internal Energy (u_1) at the state 1

$u_1= u_f + xu_{fg}$

where;

specific internal energy of the liquid (u_f) = 419.06 kJ/kg

The specific internal energy of the liquid vapor mixture $(u_{fg})$ = 2087.0 kJ/kg

∴ since ; $u_1= u_f + xu_{fg}$

(u_1) = 419.06 + (0.123 × 2087.0)

(u_1) = 675.761 kJ/kg

As the tank is rigid, so as the volume which is kept constant:

$v_2=v_1\\=0.2065 m^3/kg$

Now, let take a look at when T_2 = 180^0C from the data in the steam tables

Specific volume of the liquid (v_f) = 0.00113 m³/kg

specific volume of the liquid vapor mixture (v_g) = 0.19384 m³/kg

The quality of the mixture at the final state 2 can be determined by using the equation shown below:

$v_2=v_f+x_2v_{fg}$

$x_2=\frac{v_2-v_f}{v_{fg}}$

$x_2=\frac{v_2-v_f}{v_g-v_f}$

$x_2=\frac{0.2065-0.00113}{0.19384-0.00113}$

$x_2=\frac{0.20537}{0.19271}$

= 1.0657

From our usual steam table; we still obtained data for the Internal Energy when T_2=180^0C

Specific internal energy of the liquid (u_f) = 761.92 kJ/kg

Specific internal energy of the liquid vapor mixture $u_{fg}$ = 1820.88 kJ/kg

Calculating the internal energy at finsl state point 2 ; we have:

$u_2=u_f+u_{fg}$

= 761.92 + (1.0657 × 1820.88)

= 761.92 + 1940.511816

= 2702.431816

u_2 ≅ 2702.43 kJ/kg

Furthermore, let us calculate the mass in the system; we have:

$m= \frac{V_1}{v_1}$

where V₁ = the volume 10 - L given by the system and v₁ = specific volume at state 1 as 0.2065

V₁ = the volume 10 - L = 10 × ( 0.001 m³/L)

v₁ = 0.2065

∴

mass (m) = $\frac{10(0.001m^3/L)}{0.2065}$

= 0.04842 kg

Now, we gotten all we nee do calculate for the heat transfer that is required during the process:

$Q_{in}= m(u_2-u_1)$

$Q_{in}= 0.04842(2702.43-675.761)$

$Q_{in}= 0.04842(2026.669)$

$Q_{in}= 98.13 kJ$

Therefore, the heat transfer that is required during the process = 98.13 kJ

There you have it!, I hope this really helps alot!

answered: Guest

sorry what a asnns

explanation:

answered: Guest

answer:

(b)

explanation:

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, koolgurl2003

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

continue

Engineering, 04.07.2019 18:10, meganwintergirl

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

continue

Do you know the correct answer?

A rigid 14-L vessel initially contains a mixture of liquid water and vapor at 100°C with 12.3 percen...