Engineering, 14.02.2020 19:01, patriciamelton57

The homogeneous decomposition of the free-radical polymerization initiator diethyl peroxydicarbonate (DEPDC) has been studied in supercritical carbon dioxide using and ideal CSTR. The concentration of DEPDC in the feed to the CSTR was 0.3 mM. Because of this very low concentration, constant fluid density can be assumed. At 70 °C and a space time of 10 min, the fractional conversion of DEPDC was 0.21. At 70 °C and a space time of 30 min, the fractional conversion of DEPDC was 0.44.

The rate equation for the DEPDC decomposition is believed to have the form:
rDEPDC=k[DEPDC]n
What is the value of n, and what is the value of k at 70 °C?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Do you know the correct answer?

The homogeneous decomposition of the free-radical polymerization initiator diethyl peroxydicarbonate...