G Double‑reciprocal, or Lineweaver–Burk, plots can reveal the type of enzyme inhibition exhibited by an inhibitor. Competitive inhibitors increase the K M without affecting the V max . Noncompetitive inhibitors decrease the V max without affecting the K M . Uncompetitive inhibitors decrease both the K M and V max . A Lineweaver Burk plot shows two lines representing the kinetics of an enzyme with and without inhibitor. The x-axis plots the inverse of the substrate concentration, and the y-axis plots the inverse of the reaction velocity. The x-intercept of the line with inhibitor is more negative than the line with no inhibitor. Both lines have the same y-intercept. Based on the Lineweaver–Burk plot, what type of enzyme inhibition is exhibited by the inhibitor?
competitive
noncompetitive
uncompetitive
cannot be determined

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?