Engineering, 14.02.2020 05:08, carrieaj08

A crest vertical curve connects a +4.90 percent grade and a -1.85 percent grade. The PVI is at station 77+00.00 at an elevation of 770.00 ft. The design speed is 60 mi/h. Determine: a. The length of the vertical curve using the AASHTO method ("K" factors) b. The station of the BVC c. The elevation of the BVC d. The station of the EVC e. The elevation of the EVC f. The station of the high point g. The elevation of the high point h. The elevation of station 75+30.00 Also, provide a tabulation showing the elevations at each full station on the curve, including the distance from the PVC for each full station, the elevation on initial tangent, the offset, and the elevation on the vertical curve.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, aliceohern

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Do you know the correct answer?

A crest vertical curve connects a +4.90 percent grade and a -1.85 percent grade. The PVI is at stati...