Engineering
Engineering, 13.02.2020 19:43, suyi14

The three tools described below are part of a university's machine shop. Each piece of equipment is a balanced three-phase load rated at 220. Calculate the magnitude of the line current suplying these three tools and the power factor of the combined load.• Drill press: 10.2 kVA at 0.87 pf lag. • Lathe: 4.2 kW at 0.91 pf lag. • Band saw: line current 36.8 A(rms), 7.25 kVAR.

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
image
Engineering, 04.07.2019 19:10, babas97
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Do you know the correct answer?
The three tools described below are part of a university's machine shop. Each piece of equipment is...

Questions in other subjects: