Engineering, 12.02.2020 05:39, haley5306

Water enters the solar heating plate at 65F, and exits the solar heating plate at 112 F, which cools down the plate to an overall average temperature of approximately 150 F. Estimate the surface area of plate (in square meters) that would be required to heat the water for Joe’s house assuming that the flow rate of water through the plate is 200 gallons in 6 hours, and that the average sun angle is 45 degrees, and that the difference between the absorbed solar energy and emitted thermal energy by the plate goes to heating the water that is flowing through the plate. Hint: The plate heats up 200 gallons of water from a temperature of 65F to 112 F in 6 hours

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

Do you know the correct answer?

Water enters the solar heating plate at 65F, and exits the solar heating plate at 112 F, which cools...