Engineering, 12.02.2020 00:38, maevemboucher78
The following results were obtained from a liquid limit test on a clay using Casagrande’s cup device. # of blows 6 12 20 28 32 w (%) 52.5 47.1 43.2 38.6 37 a) Determine the liquid limit of this clay b) If the natural water content is 38% and the plastic limit is 23%, calculate the liquidity index and the consistency index. c) Describe the soil based on the consistency index d) Do you expect a brittle type of failure for this soil? If so – why/ why not?
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Do you know the correct answer?
The following results were obtained from a liquid limit test on a clay using Casagrande’s cup device...
Questions in other subjects:
