Engineering, 12.02.2020 00:25, neariah24

Fuel rate and energy input: Assume this vehicle cruises on level highway at 70 miles/hour and crankshaft speed of 3500 RPM. The vehicle is assumed to have a fuel economy of 35 miles per gallon, where gasoline has a heating value of 114,000 Btu/gallon.
Determine:
a) the fuel consumption rate (gallons/hour),
b) combustion energy per thermodynamic cycle (Btu),
c) specific heat input per thermodynamic cycle (Btu/lbm).

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Do you know the correct answer?

Fuel rate and energy input: Assume this vehicle cruises on level highway at 70 miles/hour and cranks...