Engineering, 11.02.2020 22:23, ghadeeraljelawy

For a fruit juice, shear stresses are measured by a viscometer as a function of
shear rate (the velocity gradient). When the shear stress in N/m2 is plotted
against the shear rate in the range of 0 to 50 s-1, a straight line having a slope of
0.4 is obtained. What is the viscosity of this fluid when the shear rate is 31.4 s-1?
a) 78.5 Pa. s b) 12.6 Pa. s c) 31.8 Pa. s d) 3.97 Pa. s e) 0.4 Pa. s

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, heidiburgos1own6c0

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Do you know the correct answer?

For a fruit juice, shear stresses are measured by a viscometer as a function of
shear rate (th...