Engineering
Engineering, 11.02.2020 20:21, omojay3103

Soccer is also called "association football." A soccer ball is a sphere, with a circumference of 70 centimeters [cm]. In developing a new material to use for a soccer ball when NASA attempts to colonize Mars, you test a material with a specific gravity of 1.21. Assume the ball will be a solid sphere made from this material. What is the weight in units of newtons [N] of the ball on Mars? Recall gravity on Mars is 3.7 meters per second squared [ m/s2]. *Recall the circumference of a circle is equal to the diameter times pi: C = π D

answer
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, mjcbs21
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
image
Engineering, 04.07.2019 19:20, Katmcfee7681
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
image
Engineering, 06.07.2019 03:30, carolina1636
The catalogue for a refrigerant 22, four-cylinder, hermetic compressor operating at 29 r/s. a condensing temperature of 40°c and an evaporating temperature of -4°c shows a refrigeration capacity of 115 kw. at this operating point, the motor (its efficiency is 90 percent) draws 34.5 kw. the bore of the cylinders is 87 mm and the piston stroke is 70 mm. the performance data are based on 8°c of sub-cooling of the liquid leaving the condenser. compute (a) the actual volumetric efficiency and (b) the compression efficiency.
Answers: 2
image
Engineering, 06.07.2019 04:10, 25linm
Water flows at the rate of 200 i/s upwards through a tapered vertical pipe. the diameter at marks(3) clo5) the bottom is 240 mm and at the top 200 mm and the length is 5m. the pressure at the bottom is 8 bar, and the pressure at the topside is 7.3 bar. determine the head loss through the pipe. express it as a function of exit velocity head.
Answers: 3
Do you know the correct answer?
Soccer is also called "association football." A soccer ball is a sphere, with a circumference of 70...

Questions in other subjects:

Konu
Mathematics, 02.02.2020 19:45
Konu
Mathematics, 02.02.2020 19:45