Engineering, 11.02.2020 17:15, fdelacruz19

You have a Switch LED Lightbulb with the following information:
It is equivalent to a 75 Watt incandescent lightbulb.
It uses 20 Watts of electricity.
It is estimated to last 25,000 hours.
The purchase price of the lightbulb is $51.99.
The package claims an estimated energy cost of $2.41 per year, but this estimate is not based on local electricity costs.
Assume that local electricity costs $0.086 per kW-hr.
Based on this information, we can now calculate the cost of ownership for this bulb. The cost of ownership is defined as the purchase price of the lightbulb plus the cost of the electricity required to run the lightbulb until failure.
Note the equation below: Purchase price + Total electricity cost = Cost of ownership Calculate the cost of ownership for this lightbulb. Then select the answer below that matches your calculation.
a. $40.14
b. $51.99
c. $94.99
d. $103.98

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, niyawilliams23

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

continue

Engineering, 04.07.2019 18:10, jojoangelique13

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

continue

Do you know the correct answer?

You have a Switch LED Lightbulb with the following information:
It is equivalent to a 75 Watt...