Engineering, 11.02.2020 05:31, StupidFatChipmunk

We often speak of the "root mean square" or rms displacement of a diffusing object in order to quantify the average distance a diffusing particle moves in a given amount of time. This rms displacement is simply given by the square root of the average of the square of the displacement. Considering again how the average of the square of the displacement varies with time in the diffusion displacement equation, if a particle, on average, diffuses 1.0 mm in one hour, how long (in hours) will it take for the particle to diffuse 9 mm (on average)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 06.07.2019 04:20, Jana1517

Consider a beam traveling through diamond and impinging upon the diamond-air interface. the critical angle of incidence for total internal reflection to occur is closest to the following value: select one: a)-22.50° b)-23.85 c)-24.30 d)-23.40° e)-none of the above

Answers: 3

continue

Engineering, 06.07.2019 05:20, Shihhschool20

An industrial centrifugal air compressor has 34 radial blades that has no pre-whirl. the tip speed of the blades is 300 m/s, and the radial component of the air velocity at the tip is 150 m/s. air is inducted at 101.3 kpa and a stagnation temperature of 305 k. the mass flow rate is 3 kg/s. consider the power input factor to be equal to 1.04 and a stagnation temperature at the compressor exit of 370 k, if the flow is isentropic. assume cp-1005 j/kg. k. find the power input to the compressor (in kw)

Answers: 3

continue

Do you know the correct answer?

We often speak of the "root mean square" or rms displacement of a diffusing object in order to quant...