Engineering
Engineering, 11.02.2020 05:34, Aliciaonfleek

A composite plane wall consists of a 5-in.-thick layer of insulation (ks = 0.029 Btu/h*ft*°R) and a 0.75-in.-thick layer of siding (ks = 0.058 Btu/h*ft*°R). The inner temperature of the insulation is 67°F. The outer temperature of the siding is -8°F.

Determine at steady state:

(a) the temperature at the interface of the two layers, in °F, and (b) the rate of heat transfer through the wall in Btu/h*ft^2 of surface area.

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
image
Engineering, 04.07.2019 18:10, sarahgrindstaff123
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Do you know the correct answer?
A composite plane wall consists of a 5-in.-thick layer of insulation (ks = 0.029 Btu/h*ft*°R) and a...

Questions in other subjects:

Konu
Social Studies, 10.09.2021 01:40