Engineering, 05.02.2020 21:40, hervinlouis014

A5-m × 6-m × 8-m room is to be heated by an electrical resistance heater placed in a short duct in the room.

initially, the room is at 15°c, and the local atmospheric pressure is 98 kpa.

the room is losing heat steadily to the outside at a rate of 200 kj/min.

a 300-w fan circulates the air steadily through the duct and the electric heater at an average mass flow rate of 50 kg/min.

the duct can be assumed to be adiabatic, and there is no air leaking in or out of the room.

if it takes 13 min for the room air to reach an average temperature of 25°c, find

(a) the power rating of the electric heater

(b) the temperature rise that the air experiences each time it passes through the heater.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 19:10, alex6toes

What are the major differences between injection molding and extrusion?

Answers: 2

continue

Do you know the correct answer?

A5-m × 6-m × 8-m room is to be heated by an electrical resistance heater placed in a short duct in t...