Engineering
Engineering, 28.01.2020 07:31, tfraz4412

The variation in the dynamic viscosity of a newtonian solvent for lignin pretreatment is measured and tabulated below at different temperatures. 0.24 0.57 1.53 5.02 22.44 159.51 viscosity (pa. s) temperature (k) 333 303 294 284 cbe 240 homework assignment #1 spring 2020 if the velocity distribution of the solvent is given by v = 0.02 m/s, where r denotes the radius of the pipe, a determine the shear stress and shear force exerted by the fluid at the pipe wall at all the temperatures for which the viscosity data is available. assuming that the solvent has identical density as water at the given temperatures, b) determine the corresponding reynolds numbers at each temperature. assume a schedule 40 steel pipe of nominal pipe size 2. [hint: pipe dimensions and sizes provided in appendix a.5-1 of the class text may be useful. also, use the maximum velocity from the provided profile to calculate the reynolds numbers.] [15 points a.3-1 dimensions of standard steel pipe nomina! pipe outside diameter wall sched thickness ule numberin. mm inside diameter inside cross- sectional area size (in.) in mm in. mm ft? mx 104 0.405 10.29 4 0 80 0.540 13.72 -12 mon 0.675 17.15 80 40 80 0.840 21.34 40 80 1.050 26.67 1.315 33.40 40 80 40 11 1.660 42.16 1.900 48.26 80 2.375 60.33 0.068 1.73 0.269 6.83 0.00040 0.095 2.41 0.215 5.46 0.00025 0.088 2.24 0.364 9.25 0.00072 0.119 3.02 0.302 7.67 0.00050 0.091 2.31 0.493 12.52 0.00133 0.126 3.20 0.423 10.74 0.00098 0.109 2.77 0.622 15.80 0.00211 0.147 3.73 0.546 13.87 0.00163 0.113 2.87 0.824 20.93 0.00371 0.154 3.91 0.742 18.85 0.00300 0.133 3.38 1.049 26.64 0.00600 0.179 4.45 0.957 24.31 0.00499 0.140 3.56 1.380 35.05 0.01040 0.1914.85 1.278 32.46 0.00891 0.145 3.68 1.610 40.89 0.01414 0.200 5.08 1.500 38.10 0.01225 0.154 3.91 2.067 52.50 0.02330 0.218 5.54 1.939 49.25 0.02050 0.203 5.16 2.469 62.71 0.03322 0.276 7.01 2.323 59.00 0.02942 0.216 5.49 3.068 77.92 0.05130 0.300 7.62 2.900 73.66 0.04587 0.226 5.74 3.548 90.12 0.06870 0.318 8.08 3.364 85.45 0.06170 0.237 6.02 4.026 102.3 0.08840 0.337 8.56 3.826 97.18 0.07986 0.258 6.55 5.047 128.2 0.1390 0.375 9.53 4.813 122.3 0.1263 0.280 7.11 6.065 154. 1 0.2006 0.432 10.97 5.761 146.3 0.1810 0.322 8.18 7.981 202.7 0.3474 0.500 12.70 7.625 193.7 0.3171 0.3664 0.2341 0.6720 0.4620 1.231 0.9059 1.961 1.511 3.441 2.791 5.574 4.641 9.648 8.275 13.13 11.40 21.65 19.05 30.89 27.30 47.69 42.61 63.79 57.35 82.19 74.17 129.1 117.5 186.5 168.1 322.7 294.7 25 2.875 2.0 73.03 3.500 88.90 4.000 101.6 4.500 114.3 5.563 141.3 80 6.625 168.3 8.625 219.1 40 80

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
image
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Do you know the correct answer?
The variation in the dynamic viscosity of a newtonian solvent for lignin pretreatment is measured an...

Questions in other subjects: