Briefly describe an earth-centered, earth-fixed coordinate system.
match the words in th...
Engineering, 28.01.2020 05:31, toricepeda82
Briefly describe an earth-centered, earth-fixed coordinate system.
match the words in the left column to the appropriate blanks in the sentences on the right. make certain each sentence is complete before submitting your answer. words may be used more than once.
reset
z axis
left-handed
x axis
y axis
origin
right-handed
an ecef coordinate system is an earth-based three-dimensional coordinate system with its at the mass-center of the earth, its aligned with the semi-minor (spin) axis of the earth defined at some epoch, its in the plane of the equator passing through mean greenwich meridian, and its in the plane of the equator and creating a coordinate system.
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10, abdirahmansoloman
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Do you know the correct answer?
Questions in other subjects:
English, 19.07.2021 19:00
