Engineering, 24.01.2020 01:31, emanueln

Consider the sinusoidal voltagev(t)=45cos(400πt+60∘)v. part awhat is the maximum amplitude of the voltage? express your answer to three significant figures and include the appropriate units. part bwhat is the frequency in hertz? express your answer using three significant figures. part cwhat is the frequency in radians per second? express your answer using three significant figures. part dwhat is the phase angle in radians? express your answer using three significant figures. part ewhat is the phase angle in degrees? express your answer using three significant figures. part fwhat is the period? express your answer to three significant figures and include the appropriate units. part gwhat is the first time after t=0 that v=0v? express your answer to three significant figures and include the appropriate units. part hthe sinusoidal function is shifted 5/6ms to the right along the time axis. what is the expression for v(t)? part iwhat is the minimum value of milliseconds that the function must be shifted to the left if the expression for v(t) is45sin(400πt)v?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 19:10, santosbeti90

With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.

Answers: 1

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Engineering, 04.07.2019 19:20, kaitlyn114433

Ashielded metal arc-welding operation is accomplished in a work cell by a fitter and a welder. the fitter takes 5.5 min to load components into the welding fixture at the beginning of the work cycle, and 1.5 min to unload the completed weldment at the end of the cycle. the total ength of the weld seams 1200 mm, and the travel speed used by the welder averages 300 mm/min. every 600 mm of seam length, the welding stick must be changed, which takes 0.8 min. while the fitter is working, the welder is idle (resting): and while the welder is working the fitter is idle. (a) determine the average arc-on time as a fraction of the work cycle time. (b) how much improvement in arc-on time would result if the welder used flux-cored arc welding (manually operated), given that the spool of weld wire must be changed every 10 weldments, and it takes the welder 5.0 min to accomplish the change? (c) what are the production rates for these two cases (weldments completed per hour)? attach your work and solutions.

Answers: 1

continue

Do you know the correct answer?

Consider the sinusoidal voltagev(t)=45cos(400πt+60∘)v. part awhat is the maximum amplitude of the vo...