Engineering
Engineering, 23.01.2020 18:31, trapdee61p3sj8r

Apolymeric extruder is turned on and immediately begins producing a product at a rate of 10 kg/min. an operator realizes 20 minutes later that the production rate is too low, and increases the production rate to an immediate 15 kg/min. an hour later, an emergency causes the outlet valve to rapidly adjust to 1 kg/min. one minute later, the emergency is resolved, and the outlet valve is allowed to rapidly readjust to 10 kg/min. plot production rate m(t) in kg/min against time t in min. determine the production rate function m(t) in the time domain, and then determine the laplace transform of m(t).

answer
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, meganwintergirl
Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise
Answers: 3
image
Engineering, 04.07.2019 18:10, alyssabailey7545
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
image
Engineering, 04.07.2019 18:10, Talos02
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
image
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Do you know the correct answer?
Apolymeric extruder is turned on and immediately begins producing a product at a rate of 10 kg/min....

Questions in other subjects:

Konu
Social Studies, 27.04.2021 17:50