Engineering, 20.01.2020 20:31, dijaflame67

Solve problem 15.7 if all specified conditions remain the same but radiant energy exchange from glass to the surroundings at the air temperature is also considered.

plate glass,

k = 1.35 w/m · k, initially at 850 k, is cooled by blowing air past both surfaces with an effective surface coefficient of 5 w/m
k. it is necessary, in order that the glass not crack, to limit the maximum temperature gradient in the glass to 15 k/cm during the cooling process. at the start of the cooling process, what is the lowest temperature of the cooling air that can be used?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 18:10, redrosesxx

Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux

Answers: 3

continue

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Do you know the correct answer?

Solve problem 15.7 if all specified conditions remain the same but radiant energy exchange from glas...