Engineering, 08.01.2020 05:31, Wemaybewrong

Aseawall with an opening is used to dampen the tidal influence in a coastal area (and limit erosion). the seawall is 2.5 m long (in the direction perpendicular to the page), the mean sea level on the sea side is 2.2 m above the centroid of the slot. the mean sea level on the land side of the wall is 1.4 m above the centroid of the slot. the sea side tide fluctuates +0.6 m, and the landward tide fluctuates +0.4 m.

the slot extends the entire length of the wall and is estimated to have a discharge coefficient of 0.80.

if the volume of seawater moving from the sea side to the land side of the wall is to be no more than 6 000 m' in 18 hours, what is the maximum allowable height of the slot?

note: the discharge coefficient is the ratio of the actual flow rate over the predicted flow rate. it mostly accounts for the fact that the average velocity is different from the velocity.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 19:20, rida10309

At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2

Answers: 2

continue

Do you know the correct answer?

Aseawall with an opening is used to dampen the tidal influence in a coastal area (and limit erosion)...