Engineering
Engineering, 04.01.2020 06:31, salinasroel22

A100 -l tank is filled with pure water when an inflow pipe is opened and a sugar solution with a concentration of 20 g/l flows into the tank at a rate of 0.1 l/min. the solution is thoroughly mixed and flows out of the tank at a rate of 0.1 l/min. (a) find the mass of sugar in the tank at all times after the inflow pipe is opened. (b) what is the steady-state mass of sugar in the tank? (c) at what time does the mass of sugar reach 95 % of its steady-state level?

answer
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
image
Engineering, 04.07.2019 19:10, 592400014353
For a process taking place in a closed system containing gas, the volume and pressure relationship is pvi-constant. -1.5 bar, the process starts with initial conditions, pi = =0.03 m3 and ends with final volume, v2-0.05 m3 determine the work done by the gas.
Answers: 2
image
Engineering, 06.07.2019 03:10, iiisavageoreo
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
Do you know the correct answer?
A100 -l tank is filled with pure water when an inflow pipe is opened and a sugar solution with a con...

Questions in other subjects:

Konu
Mathematics, 31.03.2021 01:00
Konu
Physics, 31.03.2021 01:00