Engineering, 03.01.2020 06:31, chiquita77
A0.2-m-long and 25-mm-thick vertical plate (k=15 w/m∙k) separates the hot water from the cold water. the plate surface exposed to the hot water has a temperature of 100°c, and the temperature of the cold water is 7°c. determine the temperature of the plate surface exposed to the cold water (ts, c). hint: the ts, c has to be found iteratively. start the iteration process with an initial guess of 53.5°c for the ts, c.
Answers: 1
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
Engineering, 03.07.2019 15:10, EmilySerna
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
A0.2-m-long and 25-mm-thick vertical plate (k=15 w/m∙k) separates the hot water from the cold water....
Mathematics, 19.08.2020 21:01
Computers and Technology, 19.08.2020 21:01
Biology, 19.08.2020 21:01
Computers and Technology, 19.08.2020 22:01