Engineering, 03.01.2020 04:31, ughpali

Air enters the compressor of an air-standard brayton cycle with a volumetric flow rate of 60 m3/s at 0.8 bar, 280 k. the compressor pressure ratio is 20, and the maximum cycle temperature is 2100 k. for the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. determine

(a) the net power developed, in mw

(b) the rate of heat addition in the combustor, in mw

(c) the thermal efficiency of the cycle

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 19:10, jimena15

10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.

Answers: 2

continue

Engineering, 04.07.2019 19:10, alex6toes

What are the major differences between injection molding and extrusion?

Answers: 2

continue

Do you know the correct answer?

Air enters the compressor of an air-standard brayton cycle with a volumetric flow rate of 60 m3/s at...