Engineering, 25.12.2019 18:31, dianereyes7475

The bit currently in use has three 12/32-in. nozzles. the driller has recorded that when the 10- lbm/gal mud is pumped at a rate of 500-gal/min, a pump pressure of 3,000 psig is observed, and when the pump is slowed to a rate of 250-gal/min, a pump pressure of 800 psi is observed. the pump is rated at 1,000 hp and has an overall efficiency of 0.9. the minimum flow rate to lift the cuttings is 240- gal/min. the maximum allowable surface pressure is 3,000 psi.

a) determine the proper pump operating conditions and bit nozzle sizes for maximum bit horsepower for the next bit run.
b) what bit horsepower will be obtained at the conditions selected?
c) what impact force will be obtained at the conditions selected?
d) what nozzle velocity will be obtained at the conditions selected? e) plot the graphical representation correspondi

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 18:20, rhussein6452

Wiy doeres rere okhn a pump whon working betwon the same pressure range?

Answers: 2

continue

Do you know the correct answer?

The bit currently in use has three 12/32-in. nozzles. the driller has recorded that when the 10- lbm...