Two spur gears in mesh have a module of 2.5 mm, a magnitude of speed ratio of 0.6, and a centre distance of 50 mm. how many teeth do the gears have? if the pinion is rotating at 1200 rpm, what is the magnitude of the pitch line velocity

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid