Engineering, 21.12.2019 01:31, priscymtz27
The uniform sign has a weight of 1500 lb and is supported by the pipe ab, which has an inner radius of 2.75 in, and an outer radius of 3.00 in. if the face of the sign is subjected to a uniform wind pressure of p= 150 lb/ft2. neglect the thickness of the sign, and assume that it is supported along the outside edge of the pipe.
(a)determine the state of stress at points cand dusing stress elements.
(b)between cand d, which point has a larger principal stress?
Answers: 1
Engineering, 04.07.2019 18:10, tjeffers90028
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10, tobyhollingsworth178
Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer
Answers: 2
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
The uniform sign has a weight of 1500 lb and is supported by the pipe ab, which has an inner radius...
English, 30.01.2020 02:44
English, 30.01.2020 02:44