Engineering, 20.12.2019 21:31, josecano2

There is a 2mm gap between computer chips and heat sinks in the system. the temperatures of the chips and heat sinks are maintained at 400k and 300k, respectively. there is air between the gap with a temperature of 300k and heat transfer coefficient of 20 w/m2k. in this case, which heat transfer mode is dominant? explain your answer.

air properties: p=1.225kg/m3, u=1.8x10-5 ns/m2, kair = 0.02 w/mk.
heat sink and heat source: ksolid = 100w/mk, varepsilon =0.5 (for all surfaces)

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, salazjlove

Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation

Answers: 1

continue

Do you know the correct answer?

There is a 2mm gap between computer chips and heat sinks in the system. the temperatures of the chip...