Atotal of 10 rectangular aluminum fins (k 5203 w/m·k) are placed on the outside flat surface of anelectronic device. each fin is 100 mm wide, 20 mm highand 4 mm thick. the fins are located parallel to each otherat a center-to-center distance of 8 mm. the temperature atthe outside surface of the electronic device is 60°c. the airis at 20°c, and the heat transfer coefficient is 100 w/m2.k. determine(a) the rate of heat loss from the electronic device to the surrounding air and (b) the fin effectiveness.

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.