Engineering, 20.12.2019 00:31, nanaflower321

Design a simple, spur gear train for a ratio of -3.3: 1 and a diametral pitch of 10. use a pressure angle of 20o. minimum number of teeth for the pinion: answer teeth minimum number of teeth for the gear: answer teeth pitch diameter for the pinion: answer inches pitch diameter for the gear: answer inches

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, annette211pdd8v9

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

continue

Engineering, 04.07.2019 19:10, ultimateapes

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

continue

Engineering, 06.07.2019 02:30, jayjay5246

Air (c-1.006 kj/kg. k, r-0.287 kj/kg. k) enters a nozzle steadily at 280 kpa and 77°c with a velocity of 50 m/s and exits at 85 kpa and 320 m/s. the heat losses from the nozzle to the surrounding medium at 20°c are estimated to be 3.2 kj/kg. determine (a) the exit temperature and (b) the total entropy change for this process. solve this problem using constant specific heats.

Answers: 1

continue

Do you know the correct answer?

Design a simple, spur gear train for a ratio of -3.3: 1 and a diametral pitch of 10. use a pressure...