Engineering, 19.12.2019 06:31, alizeleach0123

A0.80-m-diameter, 1.2-m-high garbage can is found in the morning tipped over due to high winds during the night. assuming the average density of the garbage inside to be 150 kg/m3 and taking the air density to be 1.25 kg/m3 , estimate the wind velocity during the night when the can was tipped over. take the drag coefficient of the can to be 0.7.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Engineering, 04.07.2019 19:10, jrcspiderman2003

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

continue

Do you know the correct answer?

A0.80-m-diameter, 1.2-m-high garbage can is found in the morning tipped over due to high winds durin...