Design a circuit that monitors the output of an adxl327 accelerometer and lights an led if acceleration a > 1.5g is detected for at least one second (one "g" is one times the acceleration due to gravity). the led should stay lit until manually reset using a momentary switch. you may use 741 opamps (+/- 5v supply mandatory), resistors, capacitors, inductors, silicon diodes, and, or, nand, nor, and not gates, dffs, tffs, and a 64hz clock. the logic gates run on a single +5v power supply and cannot tolerate input voltages less than -1v. the adxl327 output = 1.5v + (0.42v/g) a.