Engineering, 19.12.2019 01:31, ashiteru123

The a-36 steel axle is made from tubes ab and cd and a solid section bc. it is supported on smooth bearings that allow it to rotate freely. the tubes have an outer diameter of 30 mm and an inner diameter of 20 mm. the solid section has a diameter of 40 mm.

if the gears, fixed to its ends, are subjected to 85? n? m torques, determine the angle of twist of gear a relative to gear d.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Do you know the correct answer?

The a-36 steel axle is made from tubes ab and cd and a solid section bc. it is supported on smooth b...