Engineering, 19.12.2019 00:31, smartypants02

Acylindrical bucket of dia d = 1 m, height h = 5 m is initially empty. it is being ﬁlled with water ﬂow from the top at a rate of q = 1 m3/s. the bottom of the bucket has many small openings. the ﬂow through each opening is q = 0.01 m3/s. the openings are activated at a constant rate of n = 10 per sec by turning a lever. initially all the openings are shut. the lever to open the holes is activated at t = 1 sec after the inlet ﬂow of water has been started.
(a) what is the maximum height of water in the bucket and at what time does it occur? b) will water in the bucket ever rise to a level of 1 m?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 18:10, katelynn73

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Answers: 1

continue

Engineering, 04.07.2019 19:10, juneham

Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.

Answers: 2

continue

Engineering, 04.07.2019 19:10, rayne40

A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?

Answers: 3

continue

Do you know the correct answer?

Acylindrical bucket of dia d = 1 m, height h = 5 m is initially empty. it is being ﬁlled with water...