Engineering, 18.12.2019 06:31, eev01

The 100-lb platform rolls without slipping along the 10 degree incline on two pairs of 16-in. diameter wheels. each pair of wheels with attached axle weighs 25 lb and has a centroid radius of gyration of 5.5 in. the platform has an initial speed of 3 ft/ sec down the incline when a tension t is applied through a cables attached to the platform. if the platform acquires a speed of 3ft/sec up the incline after the tension has been applied for 8 seconds, what is the average value of the tension in the cable?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, jadeochoa4466

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, Larkinlover703

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.

Answers: 3

continue

Do you know the correct answer?

The 100-lb platform rolls without slipping along the 10 degree incline on two pairs of 16-in. diamet...