Engineering, 17.12.2019 22:31, nataliem02

It is desired to produce an aligned carbon fiber-epoxy matrix composite having a 0.18 volume fraction of fibers. calculate (a) the critical fiber length, and (b) the longitudinal strength of the composite (in mpa), assuming the following: (1) the average fiber diameter is 0.017 mm, (2) the average fiber length is 7.0 mm, (3) the fiber fracture strength is 3.2 gpa, (4) the fiber-matrix bond strength is 89 mpa, (5) the matrix stress at fiber failure is 13.5 mpa, (6) the matrix tensile strength is 65 mpa.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

Do you know the correct answer?

It is desired to produce an aligned carbon fiber-epoxy matrix composite having a 0.18 volume fractio...