Engineering, 17.12.2019 04:31, Goldenstate32
Asoft drink( mostly water) flows in a pipe at a beverage plant with a mass flow rate that would fill 220 0.355 l cans per minute. at point 2 in the pipe, the gauge pressure is 152 kpa and the cross sectional area is 8.00 cm2. at point 1, 1.35 m above point 2 , the cross sectional area is 2.00 cm2. find the (a) mass flow rate, (b) volume flow rate , (c) flow speeds at points 1 and 2, (d) gauge pressure at point 1.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, dval1146
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
Do you know the correct answer?
Asoft drink( mostly water) flows in a pipe at a beverage plant with a mass flow rate that would fill...
Questions in other subjects:
Mathematics, 08.06.2021 20:50
Mathematics, 08.06.2021 20:50
Arts, 08.06.2021 20:50
English, 08.06.2021 20:50
Mathematics, 08.06.2021 20:50
Mathematics, 08.06.2021 20:50
Chemistry, 08.06.2021 20:50
