Engineering, 16.12.2019 23:31, jayc36809

Awater jet leaves a fixed nozzle with a velocity of 10 m/s. the jet diameter is 10 cm. a 30o cone is pushed into the water jet at a speed of 5 m/s. the water impinges on the cone with the jet axis and the cone axis in perfect alignment so that the water is divided evenly by the cone. bernoulli’s equation suggests that because the pressure on the jet boundary is constant, the water velocity relative to the cone surface is constant. determine the thickness of the water stream when it reaches the base of the cone.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, theamandawhite

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

continue

Engineering, 04.07.2019 18:10, samanthabutryn

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

continue

Engineering, 04.07.2019 18:20, kodyclancy

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Do you know the correct answer?

Awater jet leaves a fixed nozzle with a velocity of 10 m/s. the jet diameter is 10 cm. a 30o cone is...