Engineering, 16.12.2019 21:31, mariaceleste110505

Asinusoidal wave on a transmission line is specified by voltage and current in phasor form: v s ( z ) = v 0 e α z e j β z and i s ( z ) = i 0 e α z e j β z e j ϕ where v0 and i0 are both real. (a) in which direction does this wave propagate and why? (b) it is found that α = 0, z0 = 50 ω, and the wave velocity is vp = 2.5 × 108 m/s, with ω = 108 s−1. evaluate r, g, l, c, λ, and ϕ.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, mirmir62

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

continue

Engineering, 04.07.2019 18:10, 0436500

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

Answers: 1

continue

Do you know the correct answer?

Asinusoidal wave on a transmission line is specified by voltage and current in phasor form: v s ( z...