Engineering, 16.12.2019 18:31, pikachu4111

An amusement park ride has a vertical cylinder with an inner radius of 3.5 m, which rotates about its vertical axis. riders stand inside against the carpeted surface and rotate with the cylinder while it accelerates to its full angular velocity. at that point the floor drops away and friction between the riders and the cylinder prevents them from sliding downward. the coefficient of static friction between the riders and the cylinder is 0.86. what minimum angular velocity in radians/second is necessary to assure that the riders will not slide down the wall?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, genyjoannerubiera

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

continue

Engineering, 04.07.2019 18:20, safiyabrowne7594

Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?

Answers: 3

continue

Do you know the correct answer?

An amusement park ride has a vertical cylinder with an inner radius of 3.5 m, which rotates about it...