Engineering, 16.12.2019 17:31, cee837

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at 2358c by rejecting waste heat to cooling water that enters the condenser at 188c at a rate of 0.25 kg/s and leaves at 268c. the refrigerant enters the condenser at 1.2 mpa and 508c and leaves at the same pressure subcooled by 58c. if the compressor consumes 3.3 kw of power, determine

(a) the mass flow rate of the refrigerant,

(b) the refrigeration load,

(c) the cop

d) the minimum power input to the compressor for the same refrigeration load

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:20, myahlit84

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

continue

Do you know the correct answer?

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated...