Engineering, 14.12.2019 23:31, krystinayagel013
Steam enters a turbine steadily at 7 mpa and 600 degree celsius with a velocity of 60 m/s and leaves at 25 kpa with a quality of 95 percent. a heat loss of 20 kj/kg occurs during the process. the inlet area of the turbine is 150 cm^2, and the exit area is 1400 cm^2. determine (a) the mass flow rate of the steam (b) the exit velocity, and (b) the power output.
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Do you know the correct answer?
Steam enters a turbine steadily at 7 mpa and 600 degree celsius with a velocity of 60 m/s and leaves...
Questions in other subjects:
Mathematics, 26.07.2020 01:01
Mathematics, 26.07.2020 01:01
