Engineering, 14.12.2019 03:31, iandadude
Ashaft carrying an idler sheave for a belt drive system is to have a nominal size of 2 in. the sheave must rotate reliably on the shaft, but with the smoothness characteristic of accurate machinery.
specify the limits of size for: .
the shaft .
the sheave bore -
list the limits of clearance that will result.
note: the design size of the hole is the basic size and the allowance should be applied to the shaft (basic hole system)
Answers: 1
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10, danksans7011
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10, lerasteidl
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Ashaft carrying an idler sheave for a belt drive system is to have a nominal size of 2 in. the sheav...
English, 25.12.2020 20:30