Engineering, 14.12.2019 00:31, saniyawilliams1207

The flow rate to a fine-bubble aeration basin is 21.5 mgd at 20°c with an influent bod concentration of 180 mg/l and 31 mg/l of ammonia. the effluent concentration is 10 mg/l of bod and no ammonia. according to the aeration equipment manufacturer, at the local operating conditions, for this equipment otr = 3.0 lb o2/hp-hr and ote = 25%. calculate:

a) the total oxygen demand, in lb/day.
b) the power required to operate the aeration system, in hp.
c) the air flow rate, in ft3 /min

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Do you know the correct answer?

The flow rate to a fine-bubble aeration basin is 21.5 mgd at 20°c with an influent bod concentration...