Engineering, 13.12.2019 23:31, elijahjacksonrp6z2o7
Athree-point bending test is performed on a spinel (mgal2o4) specimen having a rectangular cross section of height d = 3.8 mm and width b = 9 mm; the distance between support points is 25 mm.
(a) compute the flexural strength if the load at fracture is 350 n.
(b)the point of maximum deflection δy occurs at the center of the specimen and is described by
Answers: 1
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10, samanthabutryn
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Athree-point bending test is performed on a spinel (mgal2o4) specimen having a rectangular cross sec...
Mathematics, 20.11.2021 07:50
Mathematics, 20.11.2021 07:50
History, 20.11.2021 07:50