Engineering, 12.12.2019 06:31, naomicervero

Consider a rough asphalt roadway with 17 cm curbs and one 3.75 m lane in each direction and a 1.45 m shoulder on each side. the road has a longitudinal slope of 0.75% and is crowned in the center with a transverse slope of 2.25%. the local ordinance requires no ponding in the roadway (only on the shoulders) for a storm with an intensity of 90 mm/hr. a) determine the maximum distance between curb inlets. b) name two other common considerations when placing curb inlets.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, aliopqwas

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, jesuslovesusall3

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

continue

Engineering, 04.07.2019 19:10, jrcspiderman2003

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

continue

Do you know the correct answer?

Consider a rough asphalt roadway with 17 cm curbs and one 3.75 m lane in each direction and a 1.45 m...