Acantilever beam is subjected to a concentrated service live load of 25.000 lb(111 kn) acting at a distance of 3 ft 6 in.(1.07m) from the wall support. its cross section is 10 in. times 20 in. with an effective depth d = 17 .(432 min). design the stirrup needed. f_c = 3000 psi (20.7 mpa), normal-weight concrete f_y = f_yt = 40,000 psi(275.8 mpa)

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise