Engineering, 12.12.2019 05:31, teddybear8728

Acombined power cycle relies on a gas turbine cycle and a rankine cycle. heat is fed to the gas turbine combustor at a rate of 50 mw. the gas turbine cycle operates at an efficiency of 0.35. the gas that exhausts from the turbine is still hot and is used to boil water in the rankine cycle. the rankine cycle operates at an efficiency of 0.42.

find:
a) the total power produced by the combined cycle

b) the efficiency of the combined cycle
c) the rate of heat rejection from the rankine cycle

d) if the rankine boiler is operating at a pressure of 2 mpa and the steam enters the turbine at a temperature of 300 c, what is the mass flow rate of water through the rankine engine? you may assume that the water leaving the pump is saturated liquid at 2 mpa.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

Do you know the correct answer?

Acombined power cycle relies on a gas turbine cycle and a rankine cycle. heat is fed to the gas turb...