Engineering, 12.12.2019 03:31, pnicetgodp3bqss
Sales delay is the elapsed time between the manufacture of a product and its sale. according an article it is quite common for investigators to model sales delay using a lognormal distribution. for a particular product, the cited article proposes this distribution with parameter valuesμ = 2.07 and σ2 = 0.06 (here the unit for delay is )what are the variance and standard deviation of delay time? (round your answers to two decimal places.) variance months2 standard deviation months(b)what is the probability that delay time exceeds 12 months? (round your answer to four decimal )what is the probability that delay time is within one standard deviation of its mean value? (round your answer to four decimal )what is the median of the delay time distribution? (round your answer to two decimal places.)months(e)what is the 99th percentile of the delay time distribution? (round your answer to two decimal places.)months(f)among 10 randomly selected such items, how many would you expect to have a delay time exceeding 8 months? (round your answer to three decimal places.)items
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, Strick1530
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 19:20, littlepotato10
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.
Answers: 1
Engineering, 06.07.2019 02:30, khalilh1206
1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction
Answers: 1
Do you know the correct answer?
Sales delay is the elapsed time between the manufacture of a product and its sale. according an arti...
Questions in other subjects:
